Insignia NS-PDP42-09 Guia Del Usuario página 13

Insignia NS-PDP42/50-09 Plasma TVs
Connecting external equipment using component
video (best—analog)
Note
You can also connect the output from a digital
set-top box to the COMPONENT IN jacks.
This connection can be used to connect HD
equipment, such as a digital set-top box or DVD
player, to your TV.
To connect an HDTV video source to the
COMPONENT IN jacks:
1 Plug component video cables into the HDTV
video device or set-top box and into the
COMPONENT IN 1 or 2 (Y/Pb/Pr) jacks on
the back of your TV.
Match the color of the cable connectors with
the jacks: Y=green, Pb/Cb/B-Y=blue, and
Pr/Cr/R-Y=red).
2 Plug RCA audio cables from the audio out
jacks on the HDTV video device and into the
COMPONENT IN 1 or 2 AUDIO L and R
jacks on the back of your TV (match the color
of the cable connectors with the jacks:
L=white and R=red).
3 Turn on your TV and the external signal
source.
4 Press INPUT, press
Component 1 or Component 2, then press
ENTER to confirm.
Supported resolutions:
Signal Component
480i Yes
480p Yes
720p Yes
1080i Yes
1080p Yes
Y P P L R
B R
or to select
HDMI
No
Yes
Yes
Yes
Yes
www.insignia-products.com
Connecting external equipment using HDMI or DVI
(digital)
This connection can be used to connect a digital
video source, such as a PC, digital-capable
DVD, or digital set-top box, to your TV.
To connect a digital video source to the
HDMI/DVI jacks:
1 Plug an HDMI or DVI-to-HDMI cable into the
HDMI or DVI output jack on your digital video
source.
2 Plug the HDMI or DVI-to-HDMI cable into one
of the HDMI IN jacks on your TV.
If you are using a DVI cable, plug the DVI
connector into a DVI-to-HDMI adapter, then
plug the HDMI connector into one of the
HDMI IN jacks on your TV.
3 Turn on your TV and the appropriate external
signal source.
R L L
DVI or HDMI output
13