Maintaining Your Tv; Cleaning The Screen; Cleaning The Cabinet; Troubleshooting - Insignia NS-PDP42-09 Guia Del Usuario

MARANTZ 002 018 020
025 034 041
081 090 097
112
MCINTOSH 049
MCS 104
MEMOREX 107
DVD players
APEX DIGITAL 022
DENON 020 014
GE 005 006
HARMAN 027
KARDON
JVC 012
LG 001 010 016
025
MAGNAVOX 013
MARANTZ 024
MITSUBISHI 002
NAD 023
ONKYO 008 017
PANASONIC 003 009

Maintaining your TV

Early malfunctions can be prevented. Careful
and regular cleaning can extend the amount of
time you can enjoy your new TV.
Caution
Make sure that you turn the power off and unplug
the power cord before you begin any cleaning.

Cleaning the screen

Wet a soft cloth in a mixture of luke warm water
and a little fabric softener or dishwashing
detergent. Wring the cloth until it's almost dry,
and then use it to wipe the screen.
Make sure the excess water is off the screen,
and then let it air dry before you turn on your TV.

Cleaning the cabinet

Wipe the front panel and other exterior surfaces
of your TV with a soft, dry, lint-free cloth. Never
use a solvent or alcohol to clean your TV. Do not
spray insecticide near your TV. Such chemicals
may cause damage and discoloration to the
exposed surfaces.

Troubleshooting

Operation

Problem Solution
Remote control • Remove obstacles between the remote
does not work control and the player.
• Point the remote control at your TV's IR
sensor. Install fresh batteries.
Power turns off • Make sure that the sleep timer is not set.
suddenly • Check the power control settings.
36
VICTOR 088 131
WARDS 089
YAMAHA 054 055 066
092 199
PHILIPS 013
PIONEER 004 026
PROCEED 021
PROSCAN 005 006
RCA 005 006
SAMSUNG 011 015
SONY 007
THOMPSON 005 006
TOSHIBA 019 008
YAMAHA 009 018
ZENITH 010 016 025
www.insignia-products.com
Insignia NS-PDP42/50-09 Plasma TVs

Video problems

Problem Solution
No picture or • Check all cable connections.
sound • Make sure that your TV is turned on.
• Try another channel. It may be a
broadcast problem.
• Check your antenna connection,
location, or direction.
• Make sure that the power connection is
okay. Check the wall power outlet.
Picture appears • It is normal for the image to be muted
slowly when your during the startup process. If the picture
TV is turned on does not appear after five minutes, call
your Insignia service center.
Picture is • Check the volume level and mute setting.
satisfactory, but
no sound
No color, poor • Check the picture control and adjust
color, or poor color.
picture • Make sure you have provided a sufficient
distance between the TV and VCR.
• Try another channel. The problem may
be the broadcast.
• Make sure the video cables are
connected correctly.
• Check the power saving feature and
restore the brightness of your TV.
• Check the program's color features. The
problem may be that it is a black and
white movie.
Poor reception • Check the antenna and its connection. If
on some there are problems, correct them. If all
channels connections are tight, the problem may
be with a faulty antenna or cable.
• The station or your cable TV provider
may be experiencing problems.
• Check for sources of interference.
• Re-orient your antenna for better
reception.
Stripes or bars • Check for interference from other
on picture electronic devices, such as radios and
televisions, and keep magnetic or
electronic devices away from your TV.
• Check your antenna connection,
location, or direction.

Audio problems

Problem Solution
Picture okay, but • Press the volume control to increase the
no sound volume.
• Press MUTE to make sure that your TV is
not muted.
• Try another channel. The problem may
be with the broadcast.
• Make sure that the audio cables are
installed correctly.
• Adjust the balance in the AUDIO menu.
No output from
one of the
speakers
Unusual sound • A change in ambient humidity or
from inside the temperature may result in an unusual
TV noise when the product is turned on or
off. This does not indicate a fault with the
product.