Publicidad
Idiomas disponibles
Idiomas disponibles
Insignia NS-PDP42/50-09 Plasma TVs
Installing remote control batteries
To install the remote control batteries:
1 Remove the battery cover.
2 Insert two 1.5 V AA batteries into the battery
compartment. Make sure that you match the
+ and – symbols on the batteries with the +
and – symbols in the battery compartment.
3 Replace the battery cover.
Notes
• Do not mix batteries of different types.
• Do not mix old and new batteries.
• Remove batteries when the charge is depleted.
• Battery chemicals can cause a rash. If the
batteries leak, clean the battery compartment
with a cloth. If chemicals touch your skin, wash
immediately.
• If the remote control is not going to be used for
an extended period of time, remove the
batteries.
Using the remote control
To use the remote control:
•
Point the remote control directly at your TV,
within a 60° angle horizontally (30° to either
side) and within 30° vertically of the remote
control sensor on the front of your TV, and
within 26.25 feet (8 m) of your TV.
Caution
Do not expose the remote control to liquids, direct
sunlight, or shock. Do not mix batteries of different
types.
Setting up your TV
Installing the stand (NS-PDP42-09 TV only)
Managing the cables
MODE
TUNER
POWER
TV
INPUT
DVD
ZOOM
VCR
VIDEO
COMP
HDMI
PC
PICTURE
AUDIO
PC-ADJ
DISPLAY
CCD
MTS/SAP
MENU
EXIT
SLEEP
ENTER
1
RECALL
VOL
CH
MUTE
1
2
3
4
5
6
7
8
9
0
FAV
www.insignia-products.com
Notes
• Objects between the remote control and the
remote control sensor may block the remote
control signal.
• The range of the remote control may be
diminished if direct sunlight or other strong light
is shining on the remote control sensor. In this
case, change the angle of the lighting, move
your TV, or operate the remote control closer to
the remote control sensor.
You can also program the provided remote
control to operate most remote controllable
devices. See "Programming the remote control"
on page 33.
Note
The provided remote control may not work with all
models or brands.
To install the stand:
1 Carefully place the TV, screen side down, on
a cushioned surface to protect the screen
from damage.
2 Secure the stand to the bottom of the TV with
the four bolts (provided), using the holes in
the back (shown in the illustration) of the TV.
To manage the cables:
1 Connect the cables as necessary. To connect
additional equipment, see "Connecting
external equipment" on page 12.
9
Publicidad
