Insignia NS-PDP42-09 Guia Del Usuario página 32

To set up blocks for downloadable ratings:
1 Press MENU on the remote control, then
press or
2 Press ENTER. The Enter Password dialog
box opens.
3 Press the number buttons (9~0) to enter the
password (the initial password is "0000"). The
LOCK menu opens.
4 Press or
Rating, then press ENTER. The TV
Downloadable Rating sub-menu opens.
Note
The downloadable rating table may differ from the
one shown in the illustration.
5 Press or
rating you want, then press ENTER.
6 Press EXIT to return to the previous menu, or
press MENU to return to normal viewing.
Setting up blocks for specific input sources
To set up blocks for specific input sources:
1 Press MENU on the remote control, then
press or
Press ENTER. The Enter Password dialog
box opens.
32
or or to select LOCK.
to select Downloadable
to select the downloadable
or or to select LOCK.
www.insignia-products.com
Insignia NS-PDP42/50-09 Plasma TVs
2 Press the number buttons (9~0) to enter the
password (the initial password is "0000"). The
LOCK menu opens.
3 Press or
press ENTER. The Input Block sub-menu
opens.
Note
The downloadable rating table may differ from the
one shown in the illustration.
4 Press or
press or
selected source. Repeat for additional
sources.
5 Press EXIT to return to the previous menu, or
press MENU to return to normal viewing.
Enabling the lock system
This enables or disables the blocking scheme
you set up.
To set up the lock system:
1 Press MENU on the remote control, then
press or
Press ENTER. The Enter Password dialog
box opens.
to select Input Block, then
to select an input source, then
to select On or Off for the
or or to select LOCK.