Insignia NS-PDP42-09 Guia Del Usuario página 19

Insignia NS-PDP42/50-09 Plasma TVs
3 Press or
press ENTER. The Auto Tune sub-menu
opens.
Note
If the lock system is turned on, a password is
required to gain access to the Auto Tuning menu.
See "Enabling the lock system" on page 32.
4 Press or
ENTER. Your TV scans for and memorizes all
the channels available in your area.
5 Press EXIT to return to the previous menu, or
press MENU to return to normal viewing.
Manually adding or deleting channels
To manually add or delete channels:
1 Press MENU on the remote control, then
press or
CHANNEL.
2 Press ENTER to enter the CHANNEL menu.
The CHANNEL menu opens.
to select Auto Tuning, then
to select Yes, then press
or or to select
www.insignia-products.com
3 Press or
press ENTER. The Manual Tune sub-menu
opens.
Note
If the lock system is turned on, a password is
required to gain access to the Manual Tuning
menu. See "Enabling the lock system" on page 32.
4 Press or
the TV channels, then press
menu. Choices include DTV, TV, CADTV, and
CATV.
Note
If you select DTV or CADTV, an on-screen signal
strength monitor is displayed so you can see the
quality of the signal being received.
5 Press or
to add or delete.
6 Press to select Add or Delete, then press
ENTER to confirm.
7 Press EXIT to return to the previous menu, or
press MENU to return to normal viewing.
Editing the channel lists
A custom list can be created by toggling each
channel on or off. The channels in the custom
list are displayed in black, and the channels
deleted from the custom list are displayed in
gray.
After a channel is highlighted, you can add or
delete the channel by referring to the small
window at the top right corner of the screen.
To edit the channel lists:
1 Press MENU on the remote control, then
press or
CHANNEL.
to select Manual Tuning, then
to select the signal source for
to enter the
to select the channel you want
or or to select
19