Publicidad
Idiomas disponibles
Idiomas disponibles
• For mA AC/DC currents <400mA: Insert RED test lead into
V jack
function selector switch
• For µA DC currents <400µA: Insert RED test lead into
V jack
function selector switch
1. To measure current: Remove power from circuit, open circuit at
measurement point, connect meter in-series in the circuit using
the test leads, and apply power to circuit.
2. Measure the current. The meter will auto-range to display the
measurement in the most appropriate range.
Do not attempt to measure more than 10A.
When measuring currents greater than 6A, a measurement
time of 30 seconds followed by 10 minutes of recovery time
is recommended.
87
OPERATING INSTRUCTIONS
, and BLACK test lead into COM jack
5
Black lead
Red lead
, and BLACK test lead into COM jack
5
Black lead
Red lead
www.
to the mA AC/DC
2
to the µA AC/DC
2
.com
, and rotate
4
setting.
, and rotate
4
setting.
informatio
11
Publicidad
