Publicidad
Gootverlenging monteren
Opmerking: De richtingspijl in acht nemen.
1.
De boorsjabloon in het midden aan de voorkant
van de kast positioneren en met geschikte zelfkle-
vende tap bevestigen.
→ Fig.
3
Aan het kastplafond de bevestigingspunten van
2.
de bevestigingshoeken door de boorsjabloon met
een graveernaald doorprikken.
De 2 bevestigingshoeken rechts en links aan de
3.
plafonduitsnijding vastschroeven.
→ Fig.
4
Opmerking: De meegeleverde goot van het appa-
4.
raat is niet vereist.
De gootverlenging voorzichtig plaatsen om het ap-
paraat tegen krassen te beschermen.
De onderste gootverlenging op het apparaat op-
stellen.
→ Fig.
5
De bovenste gootverlenging in de bevestigings-
5.
hoeken inbrengen en over de onderste gootver-
lenging stulpen.
→ Fig.
6
→ Fig.
7
en
General information
¡ Read this instruction manual carefully.
¡ Keep the instruction manual and the
product information safe for future refer-
ence or for the next owner.
¡ The appliance can only be used safely if it
is correctly installed according to the
safety instructions. The installer is re-
sponsible for ensuring that the appliance
works perfectly at its installation location.
¡ This instruction manual is intended for the
installer of the optional accessory.
¡ Only a licensed expert may connect the
appliance.
¡ Switch off the power supply before carry-
ing out any work.
Safe installation
Observe the safety instructions when installing the
optional accessory.
WARNING ‒ Risk of suffocation!
Children may put packaging material over their
heads or wrap themselves up in it and suffocate.
Keep packaging material away from children.
▶
Do not let children play with packaging material.
▶
WARNING ‒ Risk of injury!
Components inside the appliance may have sharp
edges.
Wear protective gloves.
▶
Installation video
If you scan this QR code with your smartphone, you
will see a video of the duct extension which will
show the options for installing the duct extension.
→ Fig.
1
Scope of delivery
After unpacking all parts, check for any damage in
transit and completeness of the delivery.
→ Fig.
2
Installing the channel extension
Note: Observe the direction of the arrow.
1.
Position the drilling template in the middle at the
front edge of the unit and secure it in place using
suitable adhesive tape.
→ Fig.
3
On the top of the unit, use a bradawl to mark the
2.
fixing points for the retaining bracket through the
drill jig.
Screw on the 2 angle brackets on the right and
3.
left of the ceiling cut-out.
→ Fig.
4
Note: The supplied channel from the appliance is
4.
not required.
Carefully position the channel extension in order
to protect the appliance against scratches.
Install the lower channel extension on the appli-
ance.
→ Fig.
5
Guide the upper channel extension into the angle
5.
brackets and then place it over the lower channel
extension.
→ Fig.
6
→ Fig.
7
et
Üldised juhised
¡ Lugege juhend hoolikalt läbi.
¡ Hoidke juhend ja tooteinfo alles hili-
semaks kasutamiseks või järgmistele
omanikele.
¡ Turvaline kasutamine on tagatud ainult
siis, kui paigaldamine toimub vastavalt
paigaldusjuhendile. Paigaldatud seadme
veatu töö eest vastutab paigaldaja.
¡ Käesolev juhend on ette nähtud eritarviku
paigaldajale.
¡ Seadet tohib vooluvõrguga ühendada ai-
nult litsentseeritud elektrik.
¡ Enne mis tahes tööde teostamist lülitage
vool välja.
Ohutu paigaldamine
Eritarviku paigaldamisel järgige ohutusnõudeid.
HOIATUS ‒ Lämbumisoht!
Lapsed võivad pakkematerjalid üle pea tõmmata või
end sinna sisse kerida ja lämbuda.
Hoidke pakkematerjalid lastest eemal.
▶
Ärge laske lastel pakkematerjaliga mängida.
▶
HOIATUS ‒ Vigastusoht!
Seadme sisedetailid võivad olla teravate servadega.
Kandke kaitsekindaid.
▶
Paigaldusvideo
Selle ruutkoodi skaneerimisel oma nutiseadmega
näete kanali laienduse videot, mis näitab, millised
võimalused on olemas kanali laienduse paigal-
damiseks.
→ Joonis
1
5
Publicidad
