Twa (Tweak Width Adjustment) - JUKI MO-2800 Manual De Instrucciones

Adjustments and settings
B
A
C

TWA (Tweak Width Adjustment)

Overlocking width is set in conjunction with the adjustment of the lower
knife position. It is also possible to finely adjust the overlocking width
separately.
A To decrease the overlocking width
B To increase the overlocking width
C The material edge does not reach the seam. (There are gaps in the
D
material edge within the seam)
→ Turn the TWA knob in the direction of decreasing the overlocking
D The material edge projects from the seam or curls.
→ Turn the TWA knob in the direction of increasing the overlocking
* If the excess of thread or material curling cannot be corrected with
the "lower knife position" or "overlocking width adjustment", or if
you want to finely adjust the texture of seam, adjust the upper/lower
8
looper thread tension dial.
width.
width.
8
14