Cup Warmer Use; Mcs Use (Optional) - Dalla Corte DC PRO Manual De Usuario

Cup warmer use

In some cases, environmental
conditions can create cold air
flows around the coffee machi-
ne that may affect and divert the
normal hot air flow from the boi-
ler into the cup. This results in
failing to obtain the correct cup
temperature. If the cup is not
suitably heated, there will be an
immediate drop of 25-35°C in
coffee temperature.

MCS use (optional)

The MCS (Milk Control System)
is an automatic milk steamer.
Thanks to the MCS, a quantity of
milk is heated at a set tempe-
rature and the foam that is ob-
tained can be compared to that
obtained by the best baristas.
To use the MCS, you have to put
cold milk into a pitcher. Place
the MCS pipe into the milk and
NOTE
For proper functioning of the MCS, its pipe and terminal have
to be cleaned properly after use. Remove the terminal from the
pipe, clean it and reassemble it at least 2 times a day (depending
on frequency of use).
46
The cup warmer of this machine
is electrical and can therefore be
turned on and off by pressing the
P7 button. The cup holder is hea-
ted on its rear part only.
The status of the cup warmer is
shown on the display (upside-
down cup symbol).
press the P9 button. As soon as
the milk reaches the set tem-
perature, the MCS will stop au-
tomatically and the milk will be
ready for use.
WARNING
Do not use the MCS if the MCS
pipe is oriented upwards or to-
wards you.