Dalla Corte DC PRO Manual De Usuario página 53

2. Press the ENTER button (PD3)
to confirm.
3. If you want to start timer set up,
use the navigation buttons (PD1)
and (PD2) to select YES. Press the
ENTER button (PD3) to confirm.
4. Use the navigation buttons
(PD1) and (PD2) to select the day
to be programmed, then press the
ENTER button (PD3) to confirm.
5. Press ENTER (PD3) to pro-
gram the switch-on mode of
boiler timer no.1.
Use the navigation buttons (PD1)
and (PD2) to select the boiler
switch-on time, then press EN-
TER (PD3) to confirm.
Use the navigation buttons (PD1)
and (PD2) to select the boiler
switch-off time and then press
ENTER (PD3) to confirm.
Use the navigation buttons (PD1)
and (PD2) to select the boiler
switch-off mode and then press
ENTER (PD3) to confirm.
By confirming timer no.1 set up,
you automatically access timer
no.2 set up.
To set up boiler timer no.2, fol-
low the same instructions given
for timer no.1 set up.
Press navigation button (PD3) if
you do not want to program ti-
mer no.2.
53