6
AVAILABLE FUNCTIONS
6.1
Fuel (where included)
Enabling this function allows the stove to communicate when the pellet hopper status reaches a level
considered low, through visual and acoustic alerts on the display.
Disabling this function on the other hand means the user is forced to personally check the pellet hopper to
determine whether it needs to be filled.
To enable/disable this function:
a) Use the keys
b) set with the keys
"OFF"
•
•
"ON"
c) press the key
to confirm the set data.
6.2 Timer
It is possible to set, enable and assign to the various days of the week the customised programs for the
automatic switching on and/or off of the stove.
Up to six customised programs can be configured.
For each program it is possible to set: start time, switch off time and desired temperature.
Up to three programs can be assigned to each day of the week.
The days of the week are identified by numbers: Monday = "d1", Tuesday = "d2"; ...; Sunday = "d7".
6.2.1 Program settings
a) Use the
arrow keys to go to the set-up menu
b) Select the password "7" with the
c) Select the submenu
d) Scroll with the
and
e) The switch-on time will flash; change the value with the
f) The minutes value will flash; change the value with the
g) The value of the switch-off time will flash; change the value with the
key;
h) The minutes value will flash; change the value with the
i) The desired temperature value will flash; change the value with the
j) Press the
key to confirm the data entered.
22
on the ventilation menu
and
one of the following values:
Pellet sensor function disabled;
Pellet sensor function enabled. The display will communicate when the pellet
hopper needs to be refilled.
key and confirm with the
[2]
and confirm with the
keys the programs
and press the key
and press the
key;
key;
P1...P6
; select the one to be modified with the
and
keys and press the
and
keys and press the
and
keys and press the
;
key;
key;
key;
and
keys and press the
key;
and
keys;
004779080 - 26/08/2022
key;