Descargar Imprimir esta página

Reignition After A Power Failure; Keyboard Lock" Function; Anti-Freeze Function; Manual Activation Of The Load System (Where Included) - Palazzetti DISPLAY BLE Uso Y Funciones

Ocultar thumbs Ver también para DISPLAY BLE:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

6.5 Reignition after a power failure

In the event of a power failure, the stove will automatically switch back on, verifying the safety conditions,
when the power supply returns.

6.6 "Keyboard lock" function

With this function, it is possible to lock use of the control panel to avoid accidental changes.
To enable/disable this function:
a) Use the
arrow keys to go to the set-up menu
b) Select the password "7" with the
c) Select the submenu
d) Set one of the following values with the
Off
" → Keypad lock deactivated
"
"Lo"
→ Only the on/off key remains enabled
Hi
→ Keypad lock activated
"
"
e) Press the key
to confirm the set data.

6.7 Anti-freeze function

(in configuration 1 only)
A minimum temperature can be set below which the stove will switch on (outside the set time bands and
only of the timer is enabled). To modify the "antifreeze" temperature value:
a) Use the
arrow keys to go to the set-up menu
b) Select the password "7" with the
c) Select the submenu
d) The value will flash; modify it with the
e) Press the
key to confirm the set data.

6.8 Manual activation of the load system (where included)

In case of first use (pellet tank initially empty) or to test operation of the load unit, manual activation of
loading is possible.
On the control panel of the stove:
a) Using the arrow keys
b) Select password "7" with the key
c) Scroll with the key
d) Select password "54" with the key
e) Holding the key
f) Releasing the key will end the load operation.
Attention!
• This function is only active when the stove is off and cold.
• Before switching on again, ensure that there are no pellets in the grate.
24
key and confirm with the
[10]
and confirm with the
key and confirm with the
[9]
and confirm with the
and
navigate to the set-up menu
and confirm with the key
and select sub-menu
and confirm with the key
the load system will activate and the display will show the incremental bars
and press the
key.
and
keys:
and press the
key;
OFF
3...20°C
keys (
;
and press the key
;
[3 1 ]
;
;
key;
key;
key;
key;
);
;
004779080 - 26/08/2022

Publicidad

loading