Publicidad
Idiomas disponibles
Idiomas disponibles
ASHDOWN ENGINEERING - 12-BAND 600
USER GUIDE
This has a LEVEL control and can be switched in or out with the front panel switch.
Used in moderation, you will find it adds a lot of bright, high harmonics to the sound
giving definition and clarity not achievable in any other way.
GRAPHIC EQUALISER - The GRAPHIC EQUALISER section operates by boosting
or cutting the level of signal at various frequency points throughout the frequency
range. With the sliders set on 0dB (in their centre 'click' position ) no alteration
is made to the signal. Moving any one of the sliders up will increase or 'boost'
the signal at the frequency marked below the slider. Moving the slider down will
decrease or 'cut' the signal at that frequency.
The GRAPHIC EQUALISATION can be switched in or out with the front panel switch.
A carefully designed GRAPHIC EQUALISER is a very flexible way of varying the
sound of a bass guitar and if properly used will provide an extremely powerful
method of tone shaping for your instrument.
Because of the flexibility and massive BOOST and CUT potential of this particular
GRAPHIC it is important to know how to get the best from it.
Firstly a few things not to do and the reasons why:
1. Do not boost or cut all frequency bands as this will have the same effect as
increasing or decreasing the overall volume level without affecting the tonal
characteristic of the sound.
2. Do not use excessive bottom (30 to 40Hz) boost on the graphic unless your
speakers can handle it. Very few speaker systems are capable of handling
Publicidad
