FujiFilm SonoSite X-Porte Manual Para El Usuario página 27

b From the Cardiac Output calculation list, tap LVOT D.
If the calculation list is not visible, tap
c Position the calipers across the LVOT by dragging.
d To save the measurement, tap
3 Measure LVOT VTI:
a On a frozen Doppler spectral trace, tap Calcs.
Calcs
If this control is hidden, tapping
b From the Cardiac Output calculation list, tap LVOT VTI.
If the calculation list is not visible, tap
c Drag the caliper to the start of the waveform. Lifting your finger sets the start of the trace.
d Using your finger, trace the waveform. Lifting your finger completes the trace.
To make a correction, trace backward on the dotted line.
e To save the measurement, tap
4 Calculate HR:
a On a frozen Doppler image, tap Calcs.
Calcs
If this control is hidden, tapping More Controls displays it.
b On the Cardiac Output calculations list, tap HR.
If the calculation list is not visible, tap
c Drag the first vertical caliper to the peak of the heartbeat.
A second vertical caliper appears. The active caliper is highlighted green.
d Drag the second vertical caliper to the peak of the next heartbeat.
e To save the measurement, tap
at the top of the current list.
under the measurement name.
More Controls displays it.
at the top of the current list.
under the measurement name.
at the top of the current list.
under the measurement name.
25