Know Your Mower; Engine Controls - Craftsman CX Serie Manual Del Operador

Deck Height Lever
Oil Cap/
Dipstick
Electric
Starter
Oil Drain Valve
Muffler and
Muffler Guard
Carburetor

Engine Controls

Refer to Figure 8 for locations of the engine controls.
Oil Drain Valve
Use the oil drain valve to drain oil from the engine. Refer to the Maintenance section
for instructions.
Air Cleaner
The air cleaner cartridge can be removed and replaced. Refer to the Maintenance
section for details.

KNOW YOUR MOWER

Fuel Tank Cap
Air Cleaner
Spark Plug
Fuel Filter
Oil Filter
Figure 8
Throttle/Choke Control
Drive Control
Gear Shift Lever
Figure 7
Spark Plug
Refer to the Maintenance section for instructions on spark plug replacement.
Oil Cap/Dipstick
Refer to the Maintenance section for instructions on checking the oil.
Mower Controls
Refer to Figure 7 for locations of the mower controls.
Throttle/Choke Control
NOTE: When operating the mower with the cutting
deck engaged, be certain that the throttle/choke
control is in the fast position.
The throttle/choke control is used to adjust engine
speeds, to activate the engine choke and to stop the
engine. Always run engine with the throttle / choke
control lever in the fast position for best mower
performance.
Choke: Use when starting a cold engine.
Fast: Use during mower operation.
Slow: Use when idling engine.
Stop: Stops the engine.
Refer to Starting The Engine in the Operation section
of this manual for detailed starting instructions.
10
Blade Control
Ignition Switch
Systems Indicator Monitor
Choke
Fast
Slow
Stop