Service And Maintenance; Maintenance Schedule - Craftsman CX Serie Manual Del Operador

Before performing any type of maintenance/service, disengage all controls
and stop the engine. Wait until all moving parts have come to a complete
stop. Disconnect spark plug wire and ground it against the engine to
prevent unintended starting.
Interval
Each Use or Every 5-10 hours 1.
2.
3.
4.
5.
6.
7.
Annually or 25 hours 1.
2.
3.
Annually or 50 hours 1.
2.
Annually or 100 hours 1.
2.
3.
4.
Before Storage 1.
† Every season or 25 hours if operating under heavy load or high ambient temperature.
†† Service more frequently when used in dusty areas.

SERVICE AND MAINTENANCE

MAINTENANCE SCHEDULE

WARNING
Item
Engine oil level
Loose or missing hardware
Air FIlter
Unit and engine
Belts
Controls
Mulch Plug
Spark Plug
Control linkages/pivots and wheels
Mower Blades
Engine oil/Oil Filter †
Front Wheel Bearings
Air FIlter/ Pre-Filter ††
Spark plug
Fuel FIlter
Rear Wheels
Fuel system
Follow the maintenance schedule given below. This chart describes service
guidelines only. Use the Service Log column to keep track of completed
maintenance tasks. To locate the nearest Sears Service Center or to schedule service,
simply contact Sears at 1-800-4-MY-HOME®.
Service
1. Check
2. Tighten or replace
3. Check
4. Clean
5. Check
6. Check for proper operation
7. Check for proper plug installation
1. Check
2. Lube with light oil
3. Sharpen and balance
1. Change
2. Grease
1. Clean/ Replace
2. Replace
3. Replace
4. Grease
1. Run engine until it stops from lack of fuel, or
add stabilizer to a full tank of fresh fuel prior
to storage.
16
Service Log