Craftsman CX Serie Manual Del Operador página 19

2. Remove the air filter. See Figure 17.
3. Remove the foam pre-filter from around the paper air filter. See Figure
18. Replace paper element when dirty or damaged. Clean foam element or
replace when damaged.
4. To clean foam element, wash in a mild liquid detergent and water. Squeeze
or press the foam element to rinse out dirt and water. Do not twist; this
could damage or tear the foam element. Allow to dry thoroughly before
using. DO NOT oil the foam element.
5. Attach the new air filter with foam element, aligning the hole in the air filter
with the intake manifold. See Figure 19.
6. Attach the air filter cover, making sure to align plastic rib features on the
shroud to the plastic features on the air filter cover. See Figure 20. Turn
thumb screws clockwise until snug. Check for any misalignment.
Air Filter
SERVICE AND MAINTENANCE
Figure 17
Pre-Filter
Figure 18
Air Filter
Cover
Plastic
Feature
19
Intake
Manifold
Figure 19
Shroud
Plastic Rib
Feature
Figure 20