Setting An Alarm - Emos E8670 Manual De Instrucciones

Moving the weather station to another place will affect the measured values.
Measurement will stabilise within 12 hours of battery insertion or relocation of the weather station.
Comfort Level Indicator – Smiley
Displayed in field no. 12.
Comfortable environment
Comfortable environment
Dry environment
Dry environment
Wet environment
Temperature and Humidity Trend
Temperature and
humidity trend indicator
Weather Trend
Weather trend indicator
Displaying of Measured Precipitation and Max/Min Temperature and Humidity
Values
By default, the precipitation value displayed on the screen is for the current day (today's).
Repeatedly pressing the HISTORY button will display:
Precipitation – yesterday, this week, this month, this year, last year, max/min indoor temperature/
humidity, max/min outdoor temperature/humidity.
Note:
To manually erase the memory of measured temperature and humidity values, long-press the HISTORY
button while viewing the history of measurements.
When the maximum precipitation value of 999.99 mm is exceeded, 10.XX will appear on the screen
and the history of measurements will need to be erased.
If you wish to erase the history of precipitation measurements, disconnect the adapter/remove the
batteries from the weather station (the weather station will have to be manually set again).
Note to measured precipitation values:
Light rain = 0.25 mm/hour
Slight rain = 1 mm/hour
Rain = 4 mm/hour
Heavy rain = 16 mm/hour
Rainstorm = 35 mm/hour
Heavy rainstorm = 100 mm/hour
Chart of Pressure / Outdoor Temperature / Outdoor Humidity History
Field no. 3 shows a chart of pressure / outdoor temperature / outdoor humidity history over up to
the last 12 hours.
The chart is animated – the values are displayed automatically and repeatedly every 5 seconds.
The animation cannot be turned off and the order/setting of values cannot be changed.
If you wish to erase the history of measurements, disconnect the adapter/remove the batteries from
the weather station (the weather station will have to be manually set again).

Setting an Alarm

Press the MODE button; AL will appear on the screen.
Then, long-press the MODE button again; the time setting will start flashing.
Use the UP/DOWN buttons to set the alarm time.
Confirm the set value by pressing MODE.
rising
improvement no changes
7
constant falling
worsening