Publicidad
4.
Remove the four hair pins from the right and left side of the deck
lift bracket. See Figure 37.
Deck Lift
Bracket
Hair Pin
5.
Shift the deck forward until the trailing link is free and you are able
to remove the deck.
6.
Turn the front caster wheels outward.
7.
To install reverse the process.
8.
Adjust the belt tension according to the instructions on page 30.
Replacing the Deck Belt
1.
Follow the instructions for removing the deck.
2.
Unscrew the wing nuts from the deck covers and remove both covers.
3.
Using a 3⁄8" socket breaker bar or socket ratchet insert the drive
end into the 3⁄8" square opening in the lower idler arm assembly
and push the idler arm counterclockwise. See Figure 38. While
holding the idler arm back, loosen the deck belt from the pulley
and slide the belt away from the pulley.
SERVICE AND MAINTENANCE
Hair Pin
Figure 37
Lower Idler Arm
Assembly
Figure 38
4.
Remove the blade drive belt from all the pulleys.
5.
Reverse the process to install the belt. See Figure 39 for proper
belt routing.
NOTE: When replacing belts do not overtighten. Adjust the idler pulley
so that a ten-pound pull with a spring scale between two pulleys
deflects the belt about 1⁄2".
32
Figure 39
Publicidad
Solución de problemas
