Intended Use - Dräger X-plore 8000 Instrucciones De Uso

en |
Description
3.2 Feature description
® 1)
The Dräger X-plore 8000 The hood is used as a facepiece for respiratory
protective devices. It makes breathing air fed in from the RPD available.
The breathing air is supplied through a breathing hose on the back of the hood.
The breathing air flows from behind over the wearer's head to the area where it
is breathed in. The positive pressure created has the effect of preventing
polluted ambient air from getting in.
3.3

Intended use

The hoods are designed as the facepiece for use with the powered air-purifying
respirator Dräger X-plore® 8000 and the air line breathing apparatus Dräger®
X-plore 9300.
3.4 Limitations to intended use
The protective effect can be limited by the following factors:
– High wind speeds and a strong side wind
– Earpieces or beards in the area of the face cuff
3.5 Approvals
The hoods comply with the following directives:
– (EU) 2016/425
– (EU) 2016/425 as brought into UK law and amended
Declaration of conformity: see www.draeger.com/product-certificates
For information on the respective system approvals, see instructions for use for
the respirators specified in the 3.3 Intended use.
The hoods themselves are approved according to EN 166:2001.
®
In the USA, Dräger X-plore 8000 hoods are approved in combination with the
®
Dräger X-plore 8000 device in accordance with part 84, title 42 of the Code of
Federal Regulations. The hood may only be used together with components
with a NIOSH approval (see Approval Label on Dräger X-plore
unit).
®
1) X-plore is a registered trademark of Dräger.
10
3.6 Explanation of type-identifying marking and symbols
3.6.1 Label
The label shown is an example. The data varies depending on the type of hood.
X-plore 8000
Standard Short Hood
6
Part-No.
7
Serial-No.
Size
8
1 Approval marking
2 CE marking
3 Symbol "Pay attention to instructions for use"
4 Manufacturer
5 Production country
6 Part number (example)
7 Serial number
8 Size
Meaning of the abbreviations on the approval marking:
1 Optical class
®
8000 blower
F Protection against low energy impacts
3 Protection against liquid droplets and spray
Instructions for use
1
EN 12941
1 F 3 - EN 166
3
: R59800
Dräger Safety AG & Co. KGaA
4
:
23560 Lübeck, Germany
: S/M
5
Made in China
|
Dräger X-plore
2
®
8000 Hoods