Publicidad
Idiomas disponibles
Idiomas disponibles
To set the Timeout Lock, please follow steps in the table below.
Instructions
1. Unlock the KP200 with your User PIN
2. Press the KEY button three times- (triple-click)
3. Press button number 8 followed by the
number 5 button - (85)
4. Press the KEY button once
5. Enter the length of User Timeout:
15 = 15 minutes
99 = 99 minutes etc
6. Press the Key button once
Note:
If the Timeout Lock feature has been set by the user in 'User Mode', the Administrator is able to
change the user setting in Admin mode. If the Administrator set the Timeout Lock feature in 'Admin
Mode', the user is disabled from making any change to the Timeout feature in User Mode.
9. How to Disable the Timeout Lock in User Mode
To disable the Timeout Lock, please follow steps in the table below.
Instructions
1. Unlock the KP200 with your User PIN
2. Press the KEY button three times- (triple-click)
3. Press button number 8 followed by the
number 5 button - (85)
4. Press the KEY button once
5. To disable the Timeout Lock, press button
number 0
6. Press the Key button once
#10
0 = 0 minutes (default)
5 = 5 minutes
LED
LED State
Green
successful User PIN entry
Solid
Green
is awaiting new user defined settings
Green
Green
blinking
Green
Red
LED indicating the Auto-Lock time out has
been successfully configured
LED
LED State
Green
successful User PIN entry
Solid
Green
is awaiting new user defined settings
Green
Green
blinking
Green
Red
LED indicating the Auto-Lock time out has
been successfully disabled
www.kingston.com
LED will be solid indicating
Green
LED switches to blinking
and
Blue
LEDs indicating the drive
and
Blue
LEDs will continue to blink
and
Blue
LEDs will switch to a
Green
LED
LED continues to blink
solid LED will switch to a
LED will be solid indicating
Green
LED switches to blinking
and
Blue
LEDs indicating the drive
and
Blue
LEDs will continue to blink
and
Blue
LEDs will switch to a
Green
LED
LED continues to blink
solid LED will switch to a
Green
solid
Green
solid
Publicidad
