Kp200 Layout; Led Indicators And Their Actions - Kingston IronKey Keypad 200 Manual Del Usuario

1. KP200 Layout

2.

LED Indicators and Their Actions

LED LED State
Solid RED and
blinking GREEN
and BLUE
Red- fade Out
Red blinking
Green solid
Green blinking
Green flickering
BLUE blinking
every 5 seconds
Blue blinking
Description
Initial shipment state,
first time User PIN creation.
Locking down/incorrect PIN
entry
Locked and awaiting User PIN
entry
Drive is unlocked in User mode
When connected to a USB port if
Green Led blinks every 2 seconds
this indicates the drive has been
set as 'Read-Only'
KP200 is unlocked in Admin
mode
Battery is charging when
drive is locked and connected to
a USB port
Data exchange with host or when
not connected to a USB port
indicates an Admin PIN exists
www.kingston.com
1. Protective sleeve.
2. Keyring- Unscrew to add to keyring.
3. LED lights- RED- Locked. GREEN- Unlocked.
BLUE- Connected to the computer/data transfer/
Admin PIN indicator/User PIN change.
4. Polymer coated, wear resistant, alphanumeric
keypad.
5. Epoxy coated- All critical components are
covered by a layer of super tough epoxy resin.
6. On-device crypto chip.
7. Key button.
LED LED State
Solid RED and
blinking GREEN
Red and Green
blinking alternately
Red and Green
flickering together
Green and Blue
blinking together
Green and Blue
flickering together
Red and Blue
blinking together
Red and Blue
flickering together
Blinking Blue
Description
Reset Drive awaiting User PIN
configuration
Factory reset/deleting files in
Admin mode
Awaiting Admin PIN entry
User settings mode
Admin settings mode
When not connected to a USB
port indicates that both User
and Admin PINs have been set
on the KP200
Awaiting Admin PIN change
Awaiting User PIN change
#5