Beko BBIS13400XMSWAE Manual Del Usuario página 17

On models without wire shelves :
It is crucial to place the wire grill on the
side shelves properly. The wire grill has
one direction when placing it on the shelf.
While placing the wire grill on the desired
shelf, the open section must be on the
front.
Placing the tray on the cooking shelves
On models with wire shelves :
It is also crucial to place the trays on the
wire side shelves properly. While placing
the tray on the desired shelf, its side de-
signed for holding must be on the front.
For better cooking, the tray must be se-
cured on the stopping socket on the wire
shelf. It must not pass over the stopping
socket to contact with the rear wall of the
oven.
On models without wire shelves :
It is also crucial to place the trays on the
side shelves properly. The tray has one dir-
ection when placing it on the shelf. While
placing the tray on the desired shelf, its
side designed for holding must be on the
front.
Stopping function of the wire grill
There is a stopping function to prevent the
wire grill from tipping out of the wire shelf.
With this function, you can easily and
safely take out your food. While removing
the wire grill, you can pull it forward until it
reaches the stopping point. You must pass
over this point to remove it completely.
On models with wire shelves :
On models without wire shelves :
Tray stopping function - On models with
wire shelves
There is also a stopping function to pre-
vent the tray from tipping out of the wire
shelf. While removing the tray, release it
from the rear stopping socket and pull it
EN / 17
EN
ES