Installing The New Communication Assembly - SMA SB3000TL-US-22 Manual De Instrucciones

Idiomas disponibles

SMA Solar Technology AG

3. Release the screw of the communication assembly.

4. Remove the defective communication assembly:

• Press the right-hand retainer outwards until it releases.

• Pull the communication assembly forwards out of the right-hand retainer.

• Pull the communication assembly out of the left-hand retainer.

Installing the new communication assembly

1. Install the new communication assembly:

• Insert the communication assembly into the left-hand retainer.

• Push the right-hand retainer outwards and insert the

communication assembly into the right-hand retainer.

• Push the communication assembly into both retainers until it

snaps into place.

2. Fold the communication assembly downwards. Ensure that the

ribbon cable is not clamped by the communication assembly or

when closing the lower enclosure lid.

3. Tighten the screw of the communication assembly.

Replacement Manual

6 Replacing the Communication Assembly

CH-SBCOM31BG2-SBxx000TL-US-22-RM-xx-10

Tabla de Contenido