Publicidad
Idiomas disponibles
Idiomas disponibles
EN
26
GETTING STARTED
Remote battery installation
The infrared remote control requires 2 PCS UM-4 R03, AAA (3V)
Battery(excluded)
Power ON/OFF
1. Press POWER to turn the system on. The power indicator lights up.
2. Press the function selector buttons (DAB/FM/CD/BT/USB/AUX IN) to
select the desired function.
3. Start to adjust the volume by using the volume control button.
4. When finished listening press POWER again to turn off the system. The
power indicator goes off.
Remark: The unit is comply with ERP2, the unit will turn to Standby mode if
there is no operation on the unit after 15 mins, please press POWER button
if you want to re-start the unit.
DAB MODE
Press function button (4) (5 on remote) repeatedly to select DAB mode.
Press DN/UP (9/10) (12/13 on remote) to search the program
DAB menu
Press MENU (15) (17 on remote) to access to the options.
1. Full Scan: select this option to perform a full scan of the available DAB
programs. You can press SCAN (23) to perform the same action.
2. Manual Tune: select this option to select manually the DAB frequency
3. DRC: select this option to choose between DRC low, DRC high and
DRC off.
4. Prune: select this option to choose between PRUNE stations on or off.
DAB preset
You can program a maximum of 20 preset radio stations.
1. Press and hold PRESET (18) (19 on remote). PRESET STORE will appear
on display. Press DN/UP (9/10) (12/13 on remote) to select the preset
number. Press ENTER (19) (16 on remote) to confirm.
2. Press PRESET (18) (19 on remote) to navigate through the presets.
Publicidad
