Nemaxx P6 Instrucciones De Uso Originales página 20

NOTE:
Press and hold the button
Press the button again to exit the setting menu.
Press the button
This will allow you to navigate through the setup menu.
This procedure applies to all subsequent setting points!
COMBUSTION FAN'S AND BLOWER'S SPEED SETTING
Press and hold the button
The screen will display:
S= SMOKE(EXHUAST FAN) F=FAN(BLOWER)
Press to move from "S 0" TO "F 0". Press
Both of them can be adjusted from 20 to -20. Normally, factory setting is 0. 20 is max. and -20 is min.
Press to save the setting and go to the subsequent setting points P2, P3 and P4.
EN
approx. 2 seconds to enter the setup menu.
to confirm the settings and move to the next setting point.
approx. 2 seconds to enter the setup menu.
20
to adjust their speed.
Version: 11
08.11.2022