Nemaxx P6 Instrucciones De Uso Originales página 36

The start light or display does not
light when power is on
The blower doesn't work after
pressing the start bottom.
If after stabilization, it doesn't work,
there must be something wrong
E
No power in stove or in the
control panel.
Fuse is broken
It is normal.
It will start automatically
when the temperature is
above 30 degrees on the
venting pipe.
No power in stove or in the
control panel.
Or unplugged on the mother
board
The low temperature sensor
is broken
36
Check the power and wires.
Replace the fuse
Please wait
Check the power and wires.
Plug in
Replace it
Version: 11
08.11.2022