Timer Setting; Language Setting - Nemaxx P6 Instrucciones De Uso Originales

TIMER SETTING

Begin as described on page 18.
Press until the following message appears:
With this function you program the heater for a weekly programming, associating the switching on and the
switching off at the pre fixed timetables.
You can program daily switching on and switching off for the whole week.
By keeping the key pushed
then you can press
By pressing select hours, then press
On the above line the day is shown when it is programmed, the hour with the functioning cycle.
On the below line the programmed hour is displayed.
- The lower one is off, higher one is on, which also shows on the superior line
To save the setting press

LANGUAGE SETTING

Begin as described on page 18.
Press until the following message appears:
With this function you can select the language. By pressing the key
To save the setting press
you will find the attached instruction above,
to choose week days.
to choose the time for turning on or off.
and enter the next setting.
and enter the next setting.
EN
23
Version: 11
08.11.2022