Cuisinart FP1300BE Manual De Instrucciones página 26

NOTE: Carefully hold the blades & discs by their center hubs when inserting and removing from
the storage case.
CAUTION: DO NOT TOUCH METAL BLADES OR CUTTING EDGES OF DISCS. ALL ARE
EXTREMELY SHARP AND CONTACT COULD CAUSE INJURY.
B. DICING KIT STORAGE CASE
Unpacking & Repacking (Fig.1)
1. To open the kit, turn the flat work bowl cover anticlockwise and lift to remove.
2. Grasp the center hub on the dicing blade and carefully lift out of the storage case. Set aside on
a flat surface.
3. Using the opening in the top of the dicing grid, grip and lift out to remove.
4. The cleaning tool sits in a dedicated space in the base of the storage case.
5. When repacking the dicing kit, ensure all the parts are clean and dry. Repack by inserting parts
into the case in reverse order to the above, beginning with the cleaning tool and so on.
1 = Small pusher
2 = Flat work bowl cover lid
3 = Dicing disc
4 = Dicing grid
5 = Cleaning tool
6 = Storage case
4. USE
Before use
Before using your Expert Prep Pro for the first time, wash and dry all the parts thoroughly (see
Cleaning, Storage and Maintenance section).
Work Bowls
• The Food Processor is supplied with two work bowls.
• The large work bowl has a maximum capacity of 3L and can be used with the Large Chopping/
Mixing Blade, Dough Blade, Adjustable Slicing Disc, Reversible Shredding/Grating Disc, Dicing
Kit & Spiralising Kit.
• The small work bowl has a maximum capacity of 0.95L and can be used with the Small Chopping/
Mixing Blade only. When the Work Bowl Cover is fitted, it prevents any leakage into the large work
bowl, allowing you to use the small bowl without the need to wash up the large bowl after use.
N.B.: The large work bowl must always be fitted before the small work bowl can be set up inside.
It will not always be possible to use the work bowls to their maximum capacity. The amount of
food/liquid you can process in the bowls will depend on the density of the ingredients in the work
bowl and the consistency of the desired end result. If you find that the motor is struggling or that
the processing results are uneven, then we would recommend that you reduce the amount of
ingredients in the work bowl and instead process in batches.
For liquid, we recommend that you do not fill the bowls above the Maximum Liquid Fill markings
on each bowl (1800ml on the large work bowl and 400ml on the small work bowl.) This is to avoid
liquid spilling into the central spindle which may cause leakage.
Chopping certain foods may scratch or cloud the work bowl; this will not affect the functionality
of the bowls.
26