Using Your Induction Hob - universalblue UBE2406-21 Manual De Instrucciones

6. USING YOUR INDUCTION HOB

To start cooking
 Touch the ON/OFF control.

After power on, the buzzer beeps once, all displays
show " – " or " – – ", indicating that the induction hob has
entered the state of standby mode.
 Place a suitable pan on the cooking zone that you
wish to use.

Make sure the bottom of the pan and the surface
of the cooking zone are clean and dry.
 Touching the heating zone selection control, and a
indicator next to the key will flash
 Set a power level by touching the "-", "+", slide along the
"—"control, or just touch any point of the "—".
 If you don't select a heat zone within 1 minute, the
induction hob will automatically switch off. You will need
to start again at step 1.
 You can modify the heat setting at any time during cooking.
If the display flashes
This means that:
 you have not placed a pan on the correct cooking zone or,
 the pan you're using is not suitable for induction cooking or,
 the pan is too small or not properly centred on the cooking zone.
alternately with the heat setting
56