Publicidad
Idiomas disponibles
Idiomas disponibles
13.
TECHNICAL SPECIFICATIONS
Cooking Hob
Cooking Zones
Supply Voltage
Installed Electric Power
Product Size L×W×H(mm)
Building-in Dimensions A×B (mm)
Weight and Dimensions are approximate. Because we continually
strive to improve our products we may change specifications and
designs without prior notice.
14.
INSTALLATION
Remember that the hob must not be sealed to the kitchen
countertop or any other surface with silicone. If this is done,
the warranty will no longer be valid.
Selection of installation equipment
Cut out the work surface according to the sizes shown in the drawing.
For the purpose of installation and use, a minimum of 5 cm space
shall be preserved around the hole.
Be sure the thickness of the work surface is at least 30mm. Please
select heat-resistant work surface material to avoid larger
deformation caused by the heat radiation from the hotplate. As
shown below:
UBE2406-21
4 Zones
220-240V~,50-60Hz
6600-7400W
590X520X60
560X490
72
Publicidad
Solución de problemas
