Installing The Lig Ht Kit - Create WINDLIGHT EASY Manual Del Usuario

Ocultar thumbs Ver también para WINDLIGHT EASY:

Idiomas disponibles

B L ADE AS SE MB LY

Align the holes in the blade bracket with the holes in the blades and motor body and screw

them into place, but do not tighten the screws until they are all in place and screwed in.

Blade

Screw

• Check the correct operation of the ceiling fan, checking that there are no strange move

ments or misalignments in any part of the fan.

• In the event that any type of hum / vibration can be seen, you can proceed to adjust the

blades with the anti-roll kit.

• The anti-roll kit has self-adhesive weights and u-shaped clips.

• Turn o the ceiling fan.

• You can put the clip in the center of any blade and check if the vibration decreases.

• Turn on the fan and check. If there are no changes, turn o the fan and add another.

INSTALLING THE LIG HT KIT

• Install the bulb (not included).

•

two spring clips inside the glass neck. Pull the glass shade towards the third spring clip.

• Assemble the decorative keychain and extension chains from the hardware bag to the fan

secure by pulling lightly on both chains on the coupling.

E NG LISH

Tabla de Contenido