Publicidad
Idiomas disponibles
Idiomas disponibles
en
Removing and Replacing the Oven Door
Removing and Replacing the Oven Door
CAUTION
The door is heavy. For safe, temporary storage,
lay the door flat with the inside of the door facing
down.
IMPORTANT
Special door care instructions - For safe, tempo-
rary storage, lay the door flat with the inside of
the door facing down.
Most oven doors contain glass that can break.
Do not hit the glass with pots, pans, or any other
object. Scratching, hitting, jarring, or stressing
the glass may weaken its structure, causing an
increased risk of breakage at a later time. Do not
close the oven door until all of the oven racks are
fully in place.
To remove the oven door:
1. Open oven door completely, horizontal with floor
(Figure 8).
2. Pull up the lock located on each hinge support
toward front of the oven until the lock stops. You
may have to apply a little upward pressure on
the lock to pull it up (Figure 9).
3. Grasp the door by the sides, and close the door
until the door frame makes contact with the un-
locked hinges (Figure 10).
4. Pull the bottom of the door toward you while
rotating the top of the door toward the appliance
to completely disengage the hinge levers (Figure
11).
To replace the oven door:
1. Firmly grasp both sides of oven door along the
door sides. Do not use the oven door handle
(Figure 11).
2. Hold the oven door at the same angle as the
removal position (Figure 10) Carefully insert the
hinge levers into the oven frame until you feel
the hinge levers are seated into the hinge notch-
es. The hinge arms must be fully seated into the
hinge notches before the oven door can be fully
opened.
3. Fully open the oven door, horizontal with floor
(Figure 8).
4. Push the door hinge locks up toward and into
the oven frame on both left and right oven door
hinges to the locked position (Figure 9).
5. Close the oven door.
CARE AND CLEANING
Figure 8: Door hinge location
Figure 9: Door hinge lock
Figure 10: Removal position
Figure 11: Remove door
33
Publicidad
