Thermostat Installation - Emos P5623 Manual De Instrucciones

Mobile Application Menu Description
(see Fig. 9)
1 – Thermostat's ID Number
2 – Heating programme setting
3 – Current room temperature
4 – Menu lock – activation/deactivation
5 – Set temperature
6 – Vacation function
7 – Temperature decrease/increase
User Overview/Password Change/App Update
(see Fig. 10)
Click to view user details.
To change the user name, click Nickname and enter a new name.
To change the password, click Change password and enter the new information.
To update the application, click About and then Check for updates.
To log out of the application, click Logout.
Heating Programme Menu
(see Fig. 11)
1 – Heating programme mode selection
2 – Setting heating programme separately
for each day
3 – Setting heating programme for Monday
through Friday + Saturday through
Sunday
Clicking the line allows you to edit the temperature and time setting.
Time can be set in 10 minute increments using -/+ or by clicking the circle with temperature.
Heating Programme Menu
(see Fig. 12)
A – time span overview
B – start of temperature change setting
C – end of temperature change setting
INSTALLATION
Attention:
Before changing the thermostat, disconnect the heating system from the mains power in your home.
This will prevent potential injury by electric current.

Thermostat Installation

Place the thermostat in the stand included in the pack.
Connect the USB power supply (included) with the connected micro USB cable to 230 V mains.
Plug the micro USB cable into the bottom of the stand.
Thermostat Placement
The placement of the thermostat (transmitter unit) significantly affects its functioning.
Choose a location where members of the family spend most of their time, preferably near an inside
wall where air circulates freely, with no direct sunlight.
Do not place the thermostat in the vicinity of heat sources (such as TV sets, radiators, fridges), or
close to a door. Failure to comply with these recommendations will prevent proper control over
room temperature.
8 – Heating mode status
orange icon – heating mode active
grey icon – heating mode inactive
9 – Next temperature change in AUTO mode
10 – Anti-freeze temperature 5 °C activation
11 – Manual temperature setting mode
12 – AUTO mode
4 – Setting a heating programme for 24 hours
5 – Overview of programmed temperature
changes
6 – Saturday to Sunday
7 – Monday to Friday
D – change time setting
E – save settings
F – cancel settings
10