Publicidad
Idiomas disponibles
Idiomas disponibles
Long press the > button; the
Both units will be paired within 1 minute and the green diode on the switching unit will stop
flashing.
If you want to change the pairing code of the two units or the thermostat does not function properly,
repeat the entire pairing procedure from step 1 – the pairing code will be rewritten automatically.
Testing Wireless Communication between the Units
1. Use the + button on the thermostat to set a temperature several degrees higher than the current
room temperature.
2. The red LED on the switching unit will light up.
3. If the LED does not light up, move the control unit closer to the switching unit.
The maximum range between the control and switching unit is 100 m in an open space.
The range may decrease indoors as the signal is blocked by walls and other obstacles.
Main Switch
To turn on the switching unit, set the switch to the position.
If the heating system is not used for an extended period of time, it is recommended to turn the
switching unit off (switch the main switch to the
LED Indicators
Automatic Mode
In automatic mode, a red LED will glow when the thermostat switches on the output relay.
Manual Mode
Press the MANUAL button; a green LED will light up.
To switch on the output relay, press the M/A button; a red LED will light up.
To turn off manual mode, press the MANUAL button again; the green LED will switch off.
Setting the Clock, Calendar
Press the
button, the arrow will indicate
Use the +/- buttons to set the following values (holding the button down accelerates the value change):
Hour – minute – year – month – day.
Confirm the set value by pressing >.
After setting is complete, the current day number will be displayed:
1 – Monday
2 – Tuesday
3 – Wednesday
4 – Thursday
Heating Modes
You can press the > button repeatedly to set the following heating modes: AUTO
When in AUTO
mode, you can set additional modes of Vacation
Vacation Mode
Sets a constant temperature for an extended period of time.
When in AUTO mode, long-press the > button; the day value d:01 will begin flashing.
Repeatedly press the +/- button to set the number of days (from 1 to 99).
Confirm the set number of days by pressing >; the temperature value will begin flashing.
Repeatedly press the +/- button to set the desired temperature.
Confirm by pressing >; the
Cancel vacation mode by pressing > again.
One-Time Change Mode
Short-term manual change of temperature.
When in AUTO mode, repeatedly press the +/- button to change the temperature setting.
Wait a moment or press > to confirm the change.
The
icon will be displayed.
icon will begin flashing.
position).
5 – Friday
6 – Saturday
7 – Sunday
icon will be displayed.
12
; confirm by pressing >.
, One-time change
, OFF
, HOLD.
.
Publicidad
