Publicidad
Idiomas disponibles
Idiomas disponibles
B
Using the appliance
Using your extractor hood
LED touch control
The LED touch control has five buttons, see figure.
Reduce
Increase
Lamp
Timer
On/Off
1. Turning on the appliance: once the extractor hood has been connected to the main power supply,
the backlighting of all the buttons will come on. The LED display comes off. The extractor hood
does not work, it goes into standby mode. The backlighting will switch off automatically after 2
s. of inactivity.
2.
On/Off button):
• Press the
(On/Off) button, the front cover of the extractor hood will open. The backlighting of
the button will come on and the hood will begin to operate at low speed. The lamp will also come
on. The backlighting of the
(Decrease),
the (On/Off button) again: the front cover of the hood will close, the backlighting of this button
will go out and the hood will be switched off. Functional operations can only be performed when
the cover is open.
3.
(Lamp) button:
Push the
(Lamp) button, the backlighting of this button and the lamp will come on. If you press
the button again, the backlighting of the button and the lamp will go out. The following operations
can be performed repeatedly.
16
(Increase) and
(Lamp) buttons will come on. Press
EN
B
Using the appliance
4.
(Increase) button:
• Press the
(Increase) button: the backlighting of the
buttons will come on. The extractor hood starts to operate at low speed. The LED display will
indicate "1".
• Press the
(Increase) button again when the hood is operating at low speed: the backlighting of
the
(Increase),
(Reduce) and
(On/Off) buttons will come on. The hood operates at medium
speed and the LED display will indicate "2".
• Press the
(Increase) button again when the hood is operating at medium speed: the backlighting
of the
(Increase) button will go out. The
extractor hood operates at high speed and the LED display will indicate "3".
• If you press the
(Increase) button again while the hood is operating at high speed, it will
continue to operate at high speed.
5.
(Decrease) button
• Push the
(Decrease) button to lower the hood by one speed. The display shows the current
speed of operation. If you press the
(Reduced) button again while the hood is operating at high
speed, it will continue to operate at medium speed. The backlighting of the
and (On/Off) buttons will be on. If you press the
at medium speed, it will switch to low speed. The backlighting of the
(On/Off) buttons will be on. If you press the
at low speed, the hood will switch off, as will the backlighting of the
6.
(Timer) button:
• The
(Timer) button operates only when the motor and the light are on. The maximum timer
setting is 5 min. The timer can be repeated. After the elapsed time, the hood and the light will
switch off.
• After setting the timer, if you adjust the speed in the meantime, the timer delay will be recalculated.
17
(Increase),
(Reduce) and
(On/Off)
(Decrease) and
(On/Off) buttons will stay on. The
(Increase),
(Reduce)
(Decrease) button when the hood is operating
(Increase),
(Reduce) and
(Decrease) button again when the hood operates
(Decrease) button.
EN
Publicidad
