Publicidad
Idiomas disponibles
Idiomas disponibles
C
Useful information
Maintenance and cleaning
CAUTION:
• The extractor hood must be disconnected from the
power source before any maintenance or cleaning. Make
sure the hood is switched off at the wall socket and the
plug is disconnected.
• External surfaces are easily scratched and scraped.
Please follow the cleaning instructions to ensure the
best possible result without damaging the appliance.
General information
Maintenance, especially cleaning, must be performed once
the appliance has cooled down. Avoid leaving alkaline or
acidic substances (lemon juice, vinegar, etc.) on the surfaces.
Stainless steel
Stainless steel should be cleaned regularly (e.g. once a
week) to ensure long life. Wipe with a clean, soft cloth. You
can also use a special cleaner for stainless steel.
18
EN
C
Useful information
NOTE:
• Be sure to wipe the stainless steel to prevent the
appearance of any unsightly scratches.
Surface of the control panel
The coating on the control panel can be cleaned with hot
soapy water. Make sure the cloth is clean and properly
wrung out before cleaning. Use a soft cloth to remove any
excess moisture left after cleaning.
IMPORTANT INFORMATION:
Use neutral detergents and avoid harsh chemicals,
strong household detergents or products containing
abrasives because they would damage the appearance
of the appliance, could remove any illustrations printed
on the control panel which would void the warranty.
Grease filters
Mesh grease filters can be cleaned by hand. Dip in water
containing a degreaser for 3 minutes, then brush them
with a soft brush. Do not press too hard to avoid damaging
them. (Let them dry in the open air and away from direct
sunlight.) The filters must not be washed along with dishes
and kitchen utensils. Rinse aid should not be used Refer to
the figure opposite to dismantle the grease filters.
19
EN
Publicidad
