Publicidad
Idiomas disponibles
Idiomas disponibles
A
Preview of the appliance
• Make sure that the duct is not bent more than 90 degrees,
otherwise it will adversely affect the efficiency of the
extractor hood.
Additional safety warnings
• This appliance is only intended for the suction of stale
air over a kitchen hob in a domestic setting and in no
circumstances for use in a commercial or industrial setting.
• This appliance is only intended for household use.
• It is not suitable for use in similar applications such as:
- Kitchen areas reserved for staff in stores, offices and other
professional environments.
- Farms and use by guests in hotels, motels and other
residential environments.
- Bed-and-breakfast type environments.
- Catering and other similar applications except retail.
• The device should not be transported alone.
•The manufacturer cannot be held liable for any installation
or connection that does not comply with the national
regulations in force.
• Remove all parts of the packaging before installation.
• If the appliance does not have a power plug, the electrical
connection must be made by a qualified electrician only.
8
EN
A
Preview of the appliance
• Before connection, first cut the power supply via the means
of disconnection of the fixed power supply (electrical panel,
fuse, circuit breaker, etc.).
• The power cable must have sufficient diameters to handle
the maximum power of the device.
• In addition, the protective calibre of the electrical panel
(fuse) must be adapted.
WARNING:
Do not connect the appliance to the mains with wet
hands, as this could result in an electric shock.
• The power cable should be placed so that it does not touch
any hot part of the kitchen hob or other nearby appliance.
• Any cleaning and/or thorough maintenance of the hood
must be carried out with the electrical outlet unplugged or
after the power supply has been cut off.
• Never disassemble or modify the appliance.
• In the event of a malfunction which cannot be resolved with
the information provided in this manual, please contact the
after-sales service.
9
EN
Publicidad
