Safety Rules - Required For Usa, Canada And Australia; General And Electrical Risks; Warning - Risk Of Explosive Gases; Personal Safety Precautions - Fronius Acctiva Seller Manual De Instrucciones

Safety rules - required for USA, Canada and Aus-
tralia
General and
1
electrical risks
2
3
Minimum AWG size of an extension cable
25 ft (7.6 m)
AWG 16
4
5
6
7
8
9
Warning - Risk of It is dangerous to work in close proximity to a lead acid battery. Batteries genera-
Explosive Gases te explosive gases during normal battery operation. For this reason it is extremely
important to read this guide before using the charger and to follow the instruc-
tions precisely.
1
Personal safety There must be another person within hearing range of you or close enough to co-
precautions me to your assistance when you are working in the vicinity of a lead acid battery.
1
KEEP THESE INSTRUCTIONS CAREFULLY - This guide contains important
safety and operating instructions for these charger types (for model, see first
page of this document)
Do not expose the charger to rain or snow
The use of accessories not sold or recommended by the charger manufactu-
rer can lead to fire, electric shock or personal injury
50 ft (15.2 m)
AWG 12
To reduce the risk of damage to plugs and cables, always unplug the charger
by pulling at the plug rather than the cable
Only use an extension cable if it is absolutely necessary. The use of an incor-
rect extension cable can lead to fire and electric shock. If an extension cable
must be used, make sure that
- the pins of the extension cable plug are of the same number, size and
shape as those of the charger plug
- the extension cable is correctly wired and in good electrical condition
- the cable size is large enough for the AC amperage of the charger, as in-
dicated above
Do not use the charger with a damaged cable or plug - replace the cable or
plug immediately
Do not use the charger if it has been subjected to heavy impact, dropped or
otherwise damaged; hand it over to a qualified service technician
Do not dismantle the charger; hand it over to a qualified service technician if
maintenance or repair is required. Incorrect reassembly can result in fire and
electric shock
To reduce the risk of an electric shock, unplug the charger from the socket
before carrying out any maintenance or cleaning. This risk cannot be reduced
by setting controls to the "Off" position
To reduce the risk of battery explosion, follow these instructions, the battery
manufacturer's instructions and those of the manufacturers of any access-
ories that you plan to use in the vicinity of the battery. Observe warning signs
on these products and on the engine.
Make sure there is sufficient fresh water and soap nearby in case battery acid
comes into contact with the skin, clothing or eyes
100 ft (30.5 m) 150 ft (45.6 m)
AWG 10 AWG 8
41