Installation Instructions; Security Instructions - Create WIND CALM PATIO Manual Del Usuario

When using any electrical appliance, the following basic safety precautions should always
be observed.
• Please read this manual carefully before starting the installation. Save these instructions.
• To reduce the risk of any personal injury, attach the fan directly to the supporting structure
of the building following these instructions and use only the hardware provided.
• To avoid possible electrical shock, before installing your fan, disconnect power by turning
off the power switches in the electrical box and associated wall switches. If it is not possible
to turn off the power switches, use a warning device such as a label on the electrical box.
• All cables must meet specifications established by local and national electrical codes
and ANSI/NFPA 70. If you are not familiar with electrical installations, consult a qualified
electrician.
• Do not bend the blade coupling system while installing, tilting, or cleaning the blades.
• Do not insert other objects between the fan blades.
• To reduce the risk of fire, electrical shock, or motor damage, do not use a solid-state speed
governor with this fan. Only use original speed regulators.
• This appliance can be used by children aged 8 years and above and persons with reduced
physical, sensory or mental capabilities, or lack of experience or knowledge, provided they
are supervised by a person responsible for their safety or have been trained in its use. the
device safely. Children must not play with this appliance. They should also not carry out
cleaning and maintenance tasks on the device unless they are over 8 years of age and
supervised. Close supervision of children is necessary when using any appliance.
NOTE: The instructions and safety precautions that appear in this manual may not cover
all possible problems and situations. You should understand that both common sense and
caution are essential in the installation and use of the fan.
INSTAL LI N G TH E MOU NT I NG B R ACKE T
Drill a 8mm diameter hole in the concrete ceiling and insert a screw. Then align the bracket
with the hole and fix it with a nut.

SECURITY INSTRUCTIONS

INSTALLATION INSTRUCTIONS

Wood
roof
Sheath
raincoat
Roof of
Concrete
E NGLI SH
7