Engine speed – fast.
Engine speed – slow.
Fuel.
Max. ethanol 10%.
Cutting height.
The service position for the cutting height
lever.
The blades are engaged.
The blades are disengaged.
Transport position for the cutting deck.
Operation position for the cutting deck.
Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING:
injury or death for the operator or bystanders
if the instructions in the manual are not
obeyed.
CAUTION:
damage to the product, other materials or
the adjacent area if the instructions in the
manual are not obeyed.
880 - 009 - 31.10.2022
Used if there is a risk of
Used if there is a risk of
Engage and disengage the drive system.
Oil level.
Scannable code
yyyywwxxxx
Note:
Other symbols/decals on the product refer to
certification requirements for some commercial areas.
Euro V Emissions
WARNING:
voids the EU type-approval of this product.
Product liability
As referred to in the product liability laws, we are not
liable for damages that our product causes if:
•
the product is incorrectly repaired.
•
the product is repaired with parts that are not
from the manufacturer or not approved by the
manufacturer.
•
the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
•
the product is not repaired at an approved service
center or by an approved authority.
Safety
Note:
Used to give more information that is necessary
in a given situation.
General safety instructions
WARNING:
hands and feet and throw objects. Serious
injury or death may occur if you do not obey
the safety instructions.
WARNING:
product with damaged cutting equipment.
Damaged cutting equipment can throw
The rating plate shows se-
rial number. yyyy is the
production year and ww is
the production week.
Tampering with the engine
This product can cut off
Do not continue to use a
99