Lower Anchor Installation; Lower Anchor Removal - Diono solana 2 Manual De Instrucciones

LOWER ANCHOR INSTALLATION

WARNING! Unsecured objects can become flying hazards and can cause
serious injury in an accident. If your vehicle is equipped with lower
anchors, Diono always recommends installation utilizing the LATCH
connectors with this booster seat.
To improve safety and performance, this booster seat
is equipped with a lower anchorage system that allows
secure attachment to a vehicle's lower anchor locations.
1. Disengage LATCH connectors from storage slots
and lay booster seat on its side. While depressing the
cam lock lever, pull LATCH connectors away from
the booster seat and extend both straps all the way.
2. Attach both LATCH connectors to the vehicle
anchors, starting with the connector that is
furthest from you. For ease of use, make sure
open end of hooks face upward during use.
3. While pushing booster against vehicle seat, pull
one adjuster strap tight and then the other. Make
sure that both LATCH connectors are securely
attached to the vehicles lower anchors.
NOTE: Even with LATCH connectors properly attached
and adjusted, child seat will still have movement
against the vehicle seat back and bottom.
16
1
2
3
solana 2
DISENGAGING LOWER ANCHOR INSTALLATION
Follow the previous instructions in reverse order.
1. Reach under the bottom of the booster seat and depress the cam
lock lever while pulling the seat away from the vehicle seat back until
the lower anchor straps are extended all the way.
2. Disconnect LATCH connectors from vehicle anchors.
3. Pull lower anchor adjuster straps to recess the LATCH connectors
into the back of the booster seat bottom for safe storage.
IMPORTANT: Do not use LATCH if installation interferes with vehicle
seat belt.

LOWER ANCHOR REMOVAL

diono.com
17