KUNERT IVENTO Manual De Instrucciones página 9

MOUNTING THE CAR SEAT
The pram also comes with a car seat option for children. To mount the car seat, the car seat
adapters need to be mounted first to the chassis. To mount the adapters on the chassis, click
them into designated slots (two on each side of the pram) (fig. 23).
WARNING! Before using the car seat, ensure that the car seat adapters are correctly mounted.
Both adapters should be locked. After correct mounting of the car seat adapters on the chassis,
you can move on to mounting the car seat. To mount the car seat, you need to fit its buckles
into matching plastic handles on the adapters (fig. 24).
This pram does not substitute a cradle or a crib. If your child needs to sleep, it is
recommended to put him/her in an appropriate carrycot, cradle or crib.
The car seat comes with a hood and a cover which are mounted with snaps.
The car seat is equipped with an adjustable handle. The handle is adjusted by pressing the
red buttons on both sides of the car seat and moving the handle into a desired position (fig.
25). To remove the car seat, you need to pull the levers on both sides of the car seat (fig. 26).
To dismantle the adapters, press the buttons on the both sides of the pram chassis.
HANDLE HEIGHT ADJUSTMENT
To adjust the handle height, you need to press the buttons on both sides of the handle and
then adjust the height while simultaneously pressing the buttons (fig. 27).
MOUNTING AND REMOVAL OF THE CARRYCOT
To mount the carrycot on the chassis, click it into designated slots (one on each side of the pram)
(figs 10, 11) until the hooks are locked. The hooks are locked automatically.
Warning The carrycot should always be mounted rear-facing (so that the child faces the person
pushing the pram).
To take the carrycot off, press the adapter buttons on both sides of the pram (fig. 11) and lift the
carrycot up using the handle.
CARRYCOT HOOD
The carrycot has a permanently attached hood. You can adjust the hood as necessary by pressing
buttons on both sides of the hood and positioning the hood as necessary (fig. 12). The hood has a
handle which is used to carry the carrycot (fig. 13).
The carrycot is equipped with a cover which can be mounted by attaching the snaps of the cover
to the respective snaps on both sides of the hood (fig. 14).
CARRYCOT COVER
The carrycot is equipped with a cover which can be mounted by attaching the snaps of the cover
to the respective snaps on both sides of the hood (fig. 14).
MOUNTING AND REMOVAL OF THE PRAM SEAT
To mount the seat on the chassis, click it into designated slots (one on each side of the pram) (fig.
15) until the hooks are locked (fig. 11). The hooks are locked automatically. The stroller seat may
be mounted in front-facing and rear-facing positions.
To remove the seat, press the buttons on the both sides of the pram chassis (fig. 11).
PRAM SEAT HOOD
The pram seat is equipped with a protective hood. To mount it, slide its hooks into designated
slots on both sides of the pram seat chassis until the hood is locked (fig. 16).
To remove the hood, press the buttons of the hooks on both sides and pull up the hood (fig. 16).
The position of the hood is adjustable. It can be positioned differently. To adjust the hood
position, move it forwards or backwards to achieve the desired result (fig. 17).
If a newborn baby is put in the stroller, it is recommended to set the position of the seat which is
to be used from the baby's birth in a position similar to a lying one.
BACKREST ADJUSTMENT
The backrest can be adjusted in 4 positions. To lift the backrest up, you need to pull up the lever
from under the back of the seat and at the same time pull up the backrest up until you reach the
desired position. Next, release the lever (fig. 18).
To recline the backrest, you need to pull up the metal lever, place it in the desired position and
release the lever.
SWIVEL FRONT WHEELS
The pram has front swivel wheels with a lock of the straight-ahead push. In order to lock the
9