Rinse Aid And Detergent; Preparation And Switching On The Machine - Fagor evo CONCEPT Instrucciones De Instalación, Uso Y Mantenimiento

EN

5.6 Rinse aid and detergent

Contact a chemical product supplier to determine the most suitable product and
dose in order to optimise the wash.
The guarantee does not cover damage caused by the incorrect use of
dispensers and chemical products.
When handling chemical substances, the product safety instructions and
recommended doses must be observed. Use protective clothing, gloves and
safety glasses when handling chemical products.
Do not mix different detergents.
Correct selection and dosing of detergent and rinse aid is essential for obtaining an optimum wash.
The quantities/doses recommended by the detergent/rinse aid supplier must be observed.
Check and maintain the levels of detergent and rinse aid in the containers;
always check the levels at the start of every workday.
Make sure that the weight and filter are correctly fitted on the ends of the
rinse aid and detergent intake tubes and that they are correctly immersed in
the correct containers.
Clean the filters regularly to prevent blockages.
Each tube has a label on the end indicating «Abrillantador / Rinse Aid» or «Detergente / Detergent» to
identify them; the blue tube is for rinse aid and the clear tube for detergent.
Place the containers close to the appliance.
IMPORTANT: Do not mix different detergents or rinse aids as they could crystallise and damage the
dispensers. Whenever the type of detergent or rinse aid is changed, it is ABSOLUTELY ESSENTIAL to
clean and bleed the dispenser and its hoses, by placing the detergent/rinse aid pipe in water for several
cycles.
If the rinse aid or detergent is changed, the settings should be adjusted accordingly by qualified personnel.
RINSE AID
The machine is fitted with a rinse aid dispenser as standard. This automatically dispenses the rinse aid in
the machine boiler.
Use liquid rinse aid especially designed for use with industrial dishwashers and which is non-foam
forming at high temperatures.
Rinse aid is necessary to correctly disperse and drain the water over the dishes in order to avoid stains and
to speed up the drying process.
Scratched dishes and the formation of foam in the wash solution are usually an indication of excess rinse
aid. Dishes with too many water drops or which are slow to dry are usually a sign of insufficient rinse aid.
DETERGENT
The machine may come fitted as standard with a detergent dispenser. If this is not the case, it can be
installed subsequently. Please ask your dealer or the manufacturer.
Use liquid detergent especially designed for use with industrial dishwashers and which is non-foam
forming at high temperatures. Detergents designed for domestic use should not be used under any
circumstances.
Detergent is necessary to correctly clean the dirt and food remains from the dishes.
If the appliance is not fitted with a detergent dispenser, we recommend you install one. Otherwise it will be
necessary to dispense the detergent manually by pouring it into the centre of the tub, taking care to correctly
dissolve the detergent (not recommended as this does not guarantee optimum conditions for washing and
cleaning).

5.7 Preparation and switching on the machine

Before switching on the machine:
✓ Check that the wash/rinsing arms are correctly positioned
and fastened and rotate correctly.
✓ The corresponding trays and filters must be clean and in
place.
✓
The overflow should be mounted in place. Press until it is
firmly inserted. (See figure).
✓ Check and maintain the levels of detergent and rinse aid in
the containers to ensure they last throughout the working
day. Make sure that the weight and filter are correctly fitted
72
Detergent /
Rinse Aid
Filter
Wash/rinsing
Overflow
pipe
Filter
arms