Problem Diagnosis - Fulbat LIFEPO4 Manual Del Usuario

The battery is damaged when the charger
Red LED is
is connected.
always on
Red LED is No AC input, DC output from charger
always on connected to battery.
After the maintenance indicator turns
Green LED is
twice, the power indicator (green) is
always on
always on.
During the charging process, 25% or
50% or 75% charging LED will flash
slowly. Indicates the charging status and
displays the current battery capacity.
Charging
When the battery is about to be fully
percentage LED
charged, the 100% charge LED will slowly
light
flash. When the battery is fully charged,
the 100% charge LED will turn solid white.
The charger can be connected to the
battery indefinitely.

PROBLEM DIAGNOSIS

Use «Problem Diagnosis» when an error is displayed, it will
display a series of red LED flashing phenomena to help you de-
termine the error.
The number of flashes indicates the corresponding fault (see list
for details).
Malfunction
When the DC output is reversed
Error LED - Single
connection, the Error red LED
flash
flashes once and goes off once.
When the AC output is short-cir-
Error LED - Double
cuited the Error red LED flashes
flash
twice and goes out once.
When the charging is in the overheat
Power LED - Triple protection state, the Power red
flash LED flashes three times and goes
out once.
The charger is connected to an un-
Power LED - Red light corrected battery or the battery is
always on damaged. Have the battery checked
by a professional.
Cause/Solution
MAINTENANCE
The charger is maintenance free. If the power cord is damaged,
the charger must be left to the reseller for maintenance. The
case should be cleaned occasionally. The charger should be dis-
connected from the power while cleaning.
For indoor use only.
Do not expose to rain.
WEEE - Waste Electrical & Electronic Equipment
Do not dispose of Waste Electrical & Electro-
nic Equipment in with domestic rubbish.
5