VALBERG CNF 310 D X625C Instrucciones De Uso página 14

B
3. Display
• When power-on the refrigerator, the display screen (including the key light) will shine in
full for 3s, then the refrigerator runs according to temperature setting 3.
• Display of normal running
• On the occurrence of a failure, the corresponding LED light will give a combined display of
failure code (in recycling display);
• Where there is no failure, the LED light will display the existing temperature setting.
4. Gear setting
• The temperature setting will be changed once every time when you press the key SET.
Then, the refrigerator will run under the new setting value after 15s.
5. Adjustment of manual air damper knob
• Turn the air damper slider up, the actual temperature inside the freezer room will drop,
• Turn the air damper slider down, the actual temperature inside the freezer room will rise.
Setting1 → Setting2 → Setting3 → Setting4 → Setting5 → Setting6 → Setting1 →...
Thermostat setting for ambient T°C : NORMAL ≈ +24°C (± 4°C)
Thermostat setting for ambient T°C : COLD ≈ +16°C (± 4°C)
Thermostat setting for ambient T°C : HOT ≈ +32°C (± 4°C)
Using the appliance
13
4°C/COLDER
4°C/COLDER
4°C/COLDER
EN