Descargar Imprimir esta página

Kemper 79 002 Instrucciones De Servicio página 57

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 186
EN
DANGER
Danger of electric shock!
Any work on the electrical equipment of the product must only be
performed by a qualified electrician or by operating personnel under the
direction and supervision of a qualified electrician in accordance with
electronic regulations.
Before opening the product, pull the plug, if available, and secure it
against accidental switch-on.
For faults with the product's electrical energy supply, immediately switch
the product off at the on/off switch and if available, also pull the plug.
Use only original fuses with the prescribed amperage.
Electrical components, on which inspection, maintenance and repair
work must be carried out, must be disconnected from the power supply.
Secure equipment that has been used for disconnection against
unintentional or automatic reconnection. Firstly check that no voltage is
present in activated, electrical components, then isolate adjacent
components under voltage. When making repairs, ensure that
constructive characteristics are not altered in a way that reduces safety.
Check cables regularly for damage and replace if necessary.
CAUTION
Health hazard due to noise!
The product can produce noise, please refer to information in the
technical data. In connection with other machines and/or local
conditions, a higher noise level can occur at the operation site of the
product. In this case, the operating company is obliged to provide the
operating personnel with the appropriate protective equipment.
1502759-03
- 57 -

Publicidad

loading