Kemper 79 002 Instrucciones De Servicio página 77

7. Push the rubber sleeve (Pos. 2) + hose clamp (Pos. 3) over the pipe
socket of the extraction hood.
8. Attach the extraction hood (Pos. 8) to the end piece of the support
frame (Pos. 7). For this purpose, use the fixing material (Pos. 8.1– 8.4).
9. When bolting, make sure that the brake discs (Pos. 8.1) and the disc
springs (Pos. 8.2) are positioned correctly!
10. Tighten the hexagon screw (Pos. 8.3) + hexagon nut (Pos. 8.4) just tight
enough that the extraction hood maintains each position just
unsupported.
1502759-03
Fig. 41: Mounting the extraction hood
- 77 -
EN