EN
50
There is a symbol for the UPPER temperature zone and one for the LOWER tem-
perature zone.
Light Indicator / Multi-key Function
The interior light indicator is the dot at the bottom right of the display. The interior
light indicator will light up in showcase mode.
The interior light indicator will flash when the multi-key function is selected. To
perform the multi-key function, lightly touch and hold the first key, then touch the
rest key for at least 5 seconds and then release all the keys.
Child Lock
If in 2 minutes or longer without touching any key, the child lock will be activated
automatically for models with the control outside of cabinet. To cancel the lock,
lightly touch the UP and DOWN keys at the same time for at least 5 seconds.
Setting the Temperature Control
•
The unit has two separate temperature zones. The temperature of both zones
can be set between 5 ºC and 20 ºC (41 ºF and 68 ºF). It can be used as a wine
maturing cabinet or a wine serving cabinet. For maturing wine, the recom-
mended temperature setting ranges of both zones should be between 11 ºC
and 14 ºC (52 ºF and 57 ºF For serving wine, the recommended temperature
setting range of UPPER/LEFT zone should be between 5 ºC and 10ºC (41ºF and
50 ºF) which is ideal for serving champagne & white wine and the recommend-
ed temperature setting range of LOWER/RIGHT zone should be between 15 ºC
and 20 ºC (58ºF and 68 ºF) which is ideal for serving red wine
•
When the unit is plugged in for the first time, the unit will power up automati-
cally to the preset defaults. The preset temperature at the factory for UPPER/
LEFT temperature zone is 8 ºC 46 ºF) and for LOWER/RIGHT temperature zone
is 12 ºC ( 54 ºF) F).
•
You can touch the left side UP and DOWN keys to control the internal tem-
perature of the UPPER/LEFT temperature zone and touch the right side UP
and DOWN keys to control the internal temperature of the LOWER/RIGHT
temperature zone. When you touch either key at the first time, the display will
show the last temperature set previously.
•
IMPORTANT For non Twin Wine Conditioning System, the temperature set
for the LOWER temperature zone must always be just as high as or higher
than that in the UPPER temperature zone. For optimal performance, the set
temperature of the two zones should differ by at least 4 °C (
•
The temperature that you desire to set will increase 1 ºC or 1º F if you touch
the UP key once, on the contrary the temperature will decrease 1 ºC or 1 ºF if
you touch the DOWN key once. The display flashes while you make the setting.
•
After the temperature has been set, the display shows the current inner tem-
perature of the particular temperature zone.
•
To view the set temperature at any time, touch the UP or DOWN key, the
set temperature will temporarily flash in the display for 5 seconds. Then the
display shows the current inner temperature again.