Kemper 79 409 Instrucciones De Servicio página 78

5.7.1 Installing the spiral pipe
Item Description
27 Spiral pipe 1
28 Spiral pipe 2
29 Pipe bracket
30 Pipe bend
31 Extraction arm holder
32 Velcro tape
1. Place spiral pipe 1 (item 27) into the pipe holders provided (item 29).
2. Insert the pipe bend (item 30) into spiral duct 2 (item 28).
3. Place spiral pipe 2 with pipe bend (item 30) onto the pipe holders. The
pipe bend (item 30) must be inserted into the socket of the extraction
arm holder (item 31).
4. Fasten the pipe bend with the supplied sheet metal screws.
5. Attach the spiral pipe to the pipe holders with the Velcro tape.
6. Push on the extraction hose 1 (item 33) in the joint area at the ends of
the spiral pipes and fasten them with two hose clamps.
1502761-03
Fig. 36: Installing the spiral pipe
Item
33
34
35
36
37
Tab. 32: Positions on the product
- 78 -
Description
Extraction hose 1
Extraction hose 2
Hoist chain
Hose clamps
Wall bracket
EN